E6800 has all the adhesion power of E6000 but the formula is enhanced with UV stabilizers. It is ideal for outdoor applications. E6800 easily bonds to fiberglass, concrete, metal, glass, wood and more.

INSTRUCTIONS

Follow these step-by-step directions when using E6800: 

Read directions and test small area before use.

1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2. TUBE: Puncture inner seal using pointer cap (if tube has a foil seal). CARTRIDGE: Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from 40 to 180 °F (-40 to 82 °C) intermittently.
3. Apply directly to surfaces to be bonded or repaired.
4. Allow 24 hours for curing–Maximum bond strength may not be reached for up to 72 hours.
5. TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle.
6. Clean uncured adhesive with acetone or citrus-based solvents.
   Product is paintable and immediately resistant to precipitation upon application.

Product is paintable and immediately resistant to precipitation upon application.