Loading... Please wait...
Mon-Fri 7:30-5:00 CST 1-708-482-88885255 Dansher Road Countryside Il. 60525


Brunson 562-A Magnetic Scale Holder

Hover over image to zoom

  • Image 1

 Product Description

Brunson 562-A Magnetic Scale Holder 

For scales up to 20" or 500mm long

The 562-A employs a high energy Neodymium magnet with approximately 15 pounds of pull to hold a scale firmly against any ferrous material, regardless of surface orientation. That means you can orient your scales pointing upward, downward, or sideways, should the situation call for it. Plus, a new designallows placement on rolls from 1.5″ to 12.5″ in diameter – both sides have angled cutouts. The magnet is strong enough to hold a scale horizontally on a ferrous roll.
The edges of the scale holder are precisely ground to 90° in order to assure that the scale is held perpendicular to the surface. The stainless steel magnet body won’t corrode in harsh environments. The scale is captured between two parallel jaws. A thumbscrew moves one of the jaws, which squeezes the scale on its edges and holds it firmly in place. The jaw edges themselves are beveled, causing the back of the scale to be firmly seated against the scale holder as the jaws close. The 562-A will hold any of our currently-offered optical tooling scales up to and including the 20″ size, as well as our older type scales (which were fabricated from a thicker material).
Use the 562-A magnetic scale holder to secure our 3″, 5″, 10″, 20″, 80mm, 130mm, 250mm, or 500mm scales in any orientation on a ferrous surface.
Can be used with any of Brunson optical tooling scales found here

You Recently Viewed...


What's News


Copyright 2020 - Kara Company, Inc. 5255 Dansher Road, Countryside, Illinois 60525. - All Rights Reserved.

BigCommerce Design by PSDCenter

Click the button below to add the Brunson 562-A Magnetic Scale Holder to your wish list.